Yanartaş
“Yanartaş” is the leading domestic manufacturer of monolithic quartz heaters.
All these years we have been engaged in both the development of our own line of heating equipment and its realization.
Which allows us to buy our quality product at an affordable price, without markups.
The company’s main production facilities are located in Antalya.
The possibilities of Yanartaş quartz heaters will impress you as soon as you get acquainted with their characteristics.
The arguments in favor of the monolithic panels pleasing with warmth are concrete figures.
They are achieved thanks to the use of components of exceptionally high quality.
We will talk about them below.
Unique quartz sand used by "Yanarraş" company
One of the most important elements of any electric heater is its heating element.
It has the highest temperature and, in general, determines the performance of the heat-emitting structure.
A unique heat-resistant and heat-resistant chrome-nickel heating element has been developed for “Yanartaş” company, which has a high resistivity and exceeds 98% efficiency.
Zigzag laying of the heater allows to create a uniform heat flow over the entire surface of the monolithic panel.
Inside the quartz heater the heating element is durable, as it is not in contact with the external environment.
Its rated life exceeds 20 years
The company’s main production facilities are located in Antalya.
The possibilities of Yanartaş quartz heaters will impress you as soon as you get acquainted with their characteristics.
The arguments in favor of the monolithic panels pleasing with warmth are concrete figures.
They are achieved thanks to the use of components of exceptionally high quality.
We will talk about them below.
Technological stages of production
Preparation of raw materials
The initial components (quartz sand, refractory ecological binders and additives) for the production of monolithic slabs are stored in a closed warehouse of the company.
In order to increase the strength of the monolithic slab, high purity quartz sand as its main component has several fractions.
At this stage, the composition of the quartz heater components is carefully controlled by specialists in the factory laboratory.
They are pre-processed, sorted and subjected to radiation control.
Mass preparation
The initial components are thoroughly prepared.
The technology provides for grinding, sieving and weighing of the components.
Then they are mixed and fed into the RBU unit manufactured according to a special technical specification.
The process of mass preparation is automatic, eliminating errors in the composition of the final product.
The operator monitors the readings on the display and controls the process.
The solution is poured into the internal fittings of the heater.
The own line for the production of fittings is provided by a special mesh machine.
Clear adherence to the technology and compliance with the proportions of components allows to obtain in the end a monolithic slab of quartz heater with the required parameters.
Molding and drying of products
At this stage, the Yanartaş quartz heater takes its final shape.
For this purpose, the mortar mixture of quartz sand and binding refractory components prepared in the RBU unit is evenly distributed inside the mold placed on the vibrating table.
Under the action of vibration, the mortar is tamped and distributed over the mold of the frame, while covering the heating element.
The structural pattern on the surface of the monolith is created by placing a plastic mold on its surface.
Then the product is placed in a drying chamber, where it is subjected to thermal drying for 4 days.
The resulting monolith gets rid of moisture, acquires maximum strength and the necessary thermal and physical parameters.
Calibration and grinding
To reduce porosity and make the surface of the quartz heater aesthetically pleasing, the dried monolithic panels are sanded.
The final stage of quartz heater production is quality control.
In the quality control area, the company’s employees check the performance of the products by plugging them into the network for a long time and measuring the heating of the surfaces.
If there are external defects (cracks, chips, etc.), as well as violations of the device or production technology quartz heaters are rejected.
Defective samples account for only a fraction of a percent in the total volume of finished products.
All passed control devices are packed and moved to the warehouse.
WHAT OUR CUSTOMERS SAY
I decided at my own risk to try to purchase a product on this site.
I can say that I am completely satisfied with the service.
The order came quickly enough, without any delays.
I took myself 3 heaters.
Thank you!
Hello everyone!
For a long time wanted to buy to equip the office and make it warm, have been looking for a site for a long time.
Recently ordered us in the office 11 heaters.
Received, all good.
Surprisingly, there was not even a marriage.
Thank you
Çok fazla yazmayacağım.
Şüphe duymadan sipariş verdim, uzun zamandır istedim.
Karım buna karşı çıktı ama ben karar verdim, gerçeğin önüne koydum. Sanırım memnun oldum.
Teşekkürler